Amr menisy

Amr menisy

SAUDI ARAMCO TOTAL and Petrochemical Company (SATORP) - KBR Contractor , Senior Rotating Equipment Engineer-Reliability

Location
Egypt
Industry
Oil & Energy

As a LinkedIn member, you'll join 300 million other professionals who are sharing connections, ideas, and opportunities.

  • See who you and Amr menisy know in common
  • Get introduced to Amr menisy
  • Contact Amr menisy directly

View Amr's full profile

Amr menisy's Overview

Current
  • Senior Rotating Equipment Engineer -(Method & Reliability) at SAUDI ARAMCO TOTAL and Petrochemical Company (SATORP) - KBR Contractor
Past
  • senior rotating equipment engineer at EBIC Petrochemical & Ammonia Plant
  • Rotating Mechanical Engineer at MIDOR oil REFINERY site
  • Rotating Mechanical Engineer at EGYPT LNG IDKU SITE , vendor : GE OIL & GAS
  • Rotating equipment engineer at UNITED GAS DERIVATIVES COMPANY ( U G D C )
  • Mechanical Quality control engineer at ARESCO MANUFACTURING & INDUSTRIAL PROJECTS
Education
  • Alexandria University
Connections

500+ connections

Amr menisy's Summary

Training Courses

-American vibration insitute level 2 certified
-MASTER DEGREE COURSES GPA: 3.6 (ALEX. UNIVERSITY )
-CORROSION PROTECTION & PAINTING
-PLANNING & CONTROL IN MAINTINANCE PROJECT
-COMPUTER APPLICATION FOR PROJECT MANAGEMENT
-ENERGY MANAGEMENT LEVEL 1 & 2
-ACCURECY CONTROL

-CONDITION MONITORING ( VIBRATION ANALYSIS & XMS SOFTWARE ( EBIC) , ENG: ESAM ABD ELHAMID MUSTAFA)
-SUPERVISOR SKILLS ( E BIC )
-COMMUNICATON SKILLS (EBIC)
-MECHANICAL FAILURE ANALYSIS ( EMC )
-John crane mechanical seal course ( dry gas seal & wet seal)(ENG:TAREKSAFA ,MIDOR TRANING CENTER)
TECHNICAL REPORT WRITING
CMMS PPROGRAM "MAXIMO" (U.G.D.C.)
-TOTAL QUALITY MANEGEMENT ( A U C )
-INTRODUCTION TO ENGINEERING MATERIAL ( EMC )
-Greasing & oil lubrication technology ( ABU KEER FERTLIZATION)

Ocean marine services Egypt
•maintenance of underwater pipe lines
•witness of workshop
•maintenance of main engine & auxiliary equipment
•responsible for services of off shores


Abu keer for chemical fertilizing
•general mechanical maintenance
Zakher marine oil field service EST ( somid ) sidi kreer
•petroleum tank’s maintenance
•witness for fabrication works in shop
•general mechanical maintenance
•maintenance of pipe lines
• maintenance of floating pulley’s

Safety course

•Firefighting
•OSHA 10 Hours
•DUPONT ΄S Safety Training Observation Program.

Amr menisy's Experience

Senior Rotating Equipment Engineer -(Method & Reliability)

SAUDI ARAMCO TOTAL and Petrochemical Company (SATORP) - KBR Contractor

Privately Held; 10,001+ employees; Oil & Energy industry

October 2013Present (1 year) SAUDI ARABIA-JUBAIL Industrial CITY

•Maintenance for pumps, compressor, mixers and gear boxes, Blowers, and turbines.
•Perform/Plan/Supervise Maintenance & troubleshooting for all rotating equipment.
•Reviewed daily casing vibration trends of Plant machinery equipment i.e. Compressors, Turbines, Motors, Pumps, Fans, Gear Boxes, etc. as company follows predictive maintenance program.
•Prepare vibration severity reports for deteriorating equipment’s, which includes the history, analysis and recommendation which are unacceptable.
•Vibration data collection and analysis by using Spectrum, Phase analysis and Bump test.
•Analysis of shaft vibration data and orbits analysis collected from machinery protection BENTLY NEVADA 3500system with System1, portable vibration analyzer using CSI 2130.
•Complete command to operate Machinery Health Manager Vibration analysis software.
•Oil analysis reviewing, maintaining all oil analysis reports, oil analysis plan and sampling.
•Perform the thermo-graphic analysis on the critical machines and other plant equipment’s to detect defective zones with Thermo-graphic Camera.
•Preparation of failure reports (RCFA) and corrective action to improve the reliability, availability of the equipment.
•Reviewing and monitoring of PM plans.
•Inspect and commission new rotating equipment
•Participate in investigation teams for the analysis of individual failures related to rotating equipment. Improvement of reliability of rotating equipment through the development and application of effective reliability strategies.
•Assist Maintenance technician, Engineers in troubleshooting rotating equipment’s related problems.
•Work with vendor technical representatives to resolve equipment technical problems.
•Development, implementation and review of all maintenance work procedures according to HSE, working environment requirementsand review Job Safety Analysis (JSA).
•Fine-tuning the Computerized Maintenance and Material Management System - CMMS .

senior rotating equipment engineer

EBIC Petrochemical & Ammonia Plant

Privately Held; 201-500 employees; Oil & Energy industry

December 2009October 2013 (3 years 11 months) Elain-elsokhna ,Suez,Egypt

•Maintenance for pumps (ALL TYPES CENTERFUGAL, RECEPROCATING, DIPHRAM …) manufactures such as (NEPTUNE , MILTONROY , I.D.P , DELTA , POMPE ,GRANDFOUSE , FLOWSERVE ,I.T.T GOULDS , Ingersoll rand , SULZER , RUHER , BRAINE and LUBE , WILDEN……..).
•Maintenance for centrifugal, screw and integral compressor manufactures such as (SIEMENS, MITSUBISHI and HOWDEN...)
•Maintenance for Blowers & steam turbine manufactures such as (SIEMENS & ELLIOT…).
•Maintenance for mixers and gear boxes.
•Inspect and commission new rotating equipment including vertical and horizontal centrifugal pumps, centrifugal and reciprocating compressors
• Participate in investigation teams for the analysis of individual failures related to rotating equipment. These failures include but not limited to: Mechanical Seals failures, Bearings high temperatures, Vibration issues, and Misalignment related issues.
• Assist and direct Maintenance technicians in troubleshooting rotating equipments related problems
•Supervision for General Maintenance day to day activities.
•Fine-tuning the Computerized Maintenance and Material Management System - CMMS (MAXIMO) that include: PM synchronization Shutdown work lists for major overhauls and coordination procedures. Shutdown execution progress reports. Preventive maintenance practices review, evaluation and amendment with the aim to maximize equipment life & reliability and plant availability. Spare parts stock levels review and recommendation for the necessary amendment. Update and enhancement of MAXIMO functionalities and database. Yearly and five yearly maintenance budgets.
•Supervision of condition monitoring program activities that include Review the condition-monitoring parameters for all rotating/ static equipment such as vibration analysis program using XMS SOFTWARE, oil analysis program.

Rotating Mechanical Engineer

MIDOR oil REFINERY site

August 2005December 2009 (4 years 5 months) ALexandria -egypt

•Execute trouble shooting and preventive maintenance of refinery’s Forced Air coolers
• Maintenance for pumps (ALL TYPES CENTERFUGAL, RECEPROCATING, DIPHRAM….) manufactures such as BOMBAS , MILTONROY , I.D.P , O.M.G , POMPE , SUNDYNE , GOULDS ,Ingersoll rand , RUHER , WILDEN……..).
•Maintenance for reciprocating, centrifugal & screw compressor manufactures such as (NUOVO PIGNONE and HITACHI…….).
•Maintenance for Blowers & steam turbine manufactures such as (COPPUSE and HITACHI).
•Maintenance for mixers, gear boxes & overhead cranes.
•Solving trouble shooting for all rotating equipments Systems.
•Direct supervision for General Maintenance day to day activities.
•Direct supervision for work shop activities to maintain refinery equipments and new fabrications or modifications
•Contribute in the department paper work routine such as daily progress, daily reports, monthly reports, work orders and spare parts material list from CMMS program (PEMAC).
•Prepare scope of work to determine the required manpower and spare parts for turnaround activities.
•Development, implementation and review of all maintenance work procedures according to HSE and working environment requirements.
•Prepare permits to work and Job safety analysis in conjunction with concerned parties for General maintenance activities.
•Prepare risk analysis and tool box talk for every job.

Rotating Mechanical Engineer

EGYPT LNG IDKU SITE , vendor : GE OIL & GAS

April 2009April 2009 (1 month) IDKU-EGYPT

( NUOVO PIGNONE ) " GAS TURBINE FRAME 5
MS 5002 /D for the following duties
• HIGH GAS TURBINE COMPARTMENT TEMP. RECERTIFICATIONS
•Replacing fuel nozzles, cans, liners and transition Pieces, replace first stage buckets with the components of the new combustion system D+ Extender kit.
•OVER ALL INSPECTION FOR GAS TURBINE

Rotating equipment engineer

UNITED GAS DERIVATIVES COMPANY ( U G D C )

February 2008February 2008 (1 month) PORTSAID- DAMITA ,Egypt

●Collect all mechanical data ( specifications , recommended maintenance plan by vendors manuals , safety plans& solving trouble shooting )
● load data to MAXIMO SYSTEM

Mechanical Quality control engineer

ARESCO MANUFACTURING & INDUSTRIAL PROJECTS

August 2004August 2005 (1 year 1 month) AlexandriaEgypt

ALEX FIBER, CHEMTEX, MAIN CONTRACTOR AFECO.
Japanese's vender “ kawazaki “

Mechanical work
•check a ligament for all pumps
•construction work for spinning machine
•construction work for heaters
•construction work for filter press
•construction work for utilities equipment
piping work
• check weld consumable store at the start of each work day
•Check welding activates in all locations. And at all elevations daily
•witness all WQT when required
•check all final tie-ins for fit-up
•check all final SS tie-ins for gas purge
check welder ID at random each day


EGYPT LNG IDKU SITE ,
MAIN CONTRACTOR :BECHTEL OVER SEAS
Inspect activities including
•check weld consumable store at the start of each work day
•Check welding activates in all locations and at all elevations daily
•witness all WQT when required
•check all final tie-ins for fit-up
•check all final SS tie-ins for gas purge
•check welder ID at random each day
•review test packs if required
•punch listing of test pack
•check punch items for each system
•construction work for clear punch for systems and test pack
•erection & installation for pumps
•check mechanical system for OVER HEAD cranes

SODIUM CARBONATES , VENDOR : MEGUIN
•construction work for conveyors
•construction work for bunker
•construction work for Klein
•Quality inspection work & inspection for conveyors, steel structure level & alignment, missing items Klein & bunkers.
•Quality work inspection for electrical work
•Quality work inspection for instruments
•Start up & commissioning work for all project
•Welding inspection
•Punch lists work
•Mechanical work for motors, vibrators & lifting carriages

Amr menisy's Skills & Expertise

  1. Engineering
  2. Gas
  3. Compressors
  4. Commissioning
  5. Troubleshooting
  6. Pumps
  7. Steam Turbines
  8. gear boxes
  9. Gas Turbines
  10. mechanical seals
  11. gas seals
  12. Vibration
  13. CMMS
  14. Quality Management
  15. Quality Engineering
  16. Air Compressors
  17. Compressor
  18. Mechanical Seals
  19. Seals
  20. Preventive Maintenance
  21. Petroleum
  22. LNG
  23. Oil/Gas
  24. Inspection
  25. Centrifugal Compressors
  26. Rotating Equipment

View All (26) Skills View Fewer Skills

Amr menisy's Education

Alexandria University

M.SC Mechanical Engineering, Mechanical Engineering

19992004

Grade: very good

Activities and Societies: M.SC MASTER DEGREE(Alexandria University) QUALITY MANAGEMENT APPLIED TO MAINTINANCE PROJECTS published paper Accepted paper published in the behalf of the scientific committee of ICEMA 2010 ( THE Second International conference on Engineering Systems Management & A applications ) American University Of Sharjah,UAE,2010 Title : Review and Study Of Quality Tools in Industry

Amr menisy's Additional Information

Contact Amr for:

  • career opportunities
  • consulting offers
  • new ventures
  • job inquiries
  • expertise requests
  • business deals
  • reference requests
  • getting back in touch

View Amr menisy’s full profile to...

  • See who you and Amr menisy know in common
  • Get introduced to Amr menisy
  • Contact Amr menisy directly

View Amr's full profile

Viewers of this profile also viewed...