Sulfuric Acid Associates

Sulfuric Acid Associates

About the Sulfuric Acid Associates Group

This is the group for the professionals of the sulfuric acid industry. Process, mechanical, electrical and all associated engineering disciplines as well as those involved... more »
This is the group for the professionals of the sulfuric acid industry. Process, mechanical, electrical and all associated engineering disciplines as well as those involved with the design, fabrication, construction, supply and maintenance of sulfuric acid production facilities. Downstream users of sulfuric acid are all welcome to join and network.

Globally this is a small and essential industry. The ability to network and learn from and about each other is a vital component to our continuing success. « less

Have something to say?

Join LinkedIn for free to participate in the conversation. When you join, you can comment and post your own discussions.

Join LinkedIn

Most Popular Discussions

Ankit S.

Ankit

Regarding Sulphuric Acid from Molten Sulphur root. What would be the material balance? How to optimize the Size of the stripper/Absorber?

posted 1 day ago

Duane A. 15 hours ago • Edit • Material Balance: S+O2-->SO2, ... »
See more »
John W. Duane A.
Sankar N.

Sankar

If water got filled up into empty absorption tower pump tank any problem will come? Any manitenance job should be done?

posted 4 days ago

Shailesh S. 1 day ago • Edit • I agree with Mark. Assuming that the pump tank was brick lined using standard silicate cement, water would soften / weaken the joints. Need ... »
See all 6 comments »
Luis G. George W. Shailesh S.
José Miguel O.

José Miguel

HI FRIENDS, What compromises have been made to get the fastest SO2--->SO3 reaction with the best yields?

posted 7 months ago

sAumil S. 2 days ago • Edit • Please follow MECS site for new development in catalyst & catalyst selection & handling criteria ... »
See all 8 comments »
John W. Vithal R. sAumil S.
Jakkarat N.

Jakkarat

Help me please !!!! How to calculate moisture content or vapor pressure from dew point ??? @pressure 0.56 bar

posted 3 days ago

Alvaro S. 2 days ago • Edit • It depends on what you are calculating. For low temperatures, Antoine's equation provides a good estimate of the vapor pressure. For the dew ... »
See more »
Alvaro S.
Eduardo M.

Eduardo

¿Could you help me please with your opinion about vantages and advantages of choice acid coolers of SX compared with anodic protected...

posted 5 months ago

Kim N. 3 days ago • Edit • The first SX coolers for sulphuric acid service were installed in 1985 and are still in service today. Since then, more than one hundred SX ... »
See more »
Kim N.
Vidyanand Prasad Y.

Vidyanand Prasad

What is the maximum pressure drop that can be allowed to take place in Converter bed 1

posted 17 days ago

Randy P. 4 days ago • Edit • I believe that your converter was designed for 385 maximum pressure drop. You need to remember that you have a stainless converter and failure ... »
See all 7 comments »
John W. Alvaro S. Randy P.
Tushar P.

Tushar

We are continuously getting turbid sulfuric acid, what is the cause of turbidity in sulfuric acid? We want clear colorless sulfuric acid,...

posted 1 month ago

sAumil S. 29 days ago • Edit • yes it is our old plant which is approx 25-28 years old. and from beginning of the plant we get turbid acid. ... »
See all 7 comments »
Aditya S. George W. sAumil S.
Jacob L.

Jacob

Temperature sensors in furnace

What type of thermo wells are you using in your sulfur furnace? What is the material out of and how long does it last?

posted 2 months ago

Shirley C. 1 month ago • Edit • Hi All. Would these suggestions operate well in a fluid bed roaster? We roast zinc sulphide concentrates. Bed temperature approx 935C. ... »
See all 5 comments »
Craig J. Shirley C.
Gujarati P.

Gujarati

How to calculate 98.5% Sulfuric Acid Inlet Flow Rate in Inter-pass Absorption Tower & Final Absorption Tower?

Base:-100 TPD Sulfuric Acid as 100%
Data:- Acid Inlet Temperature=65 Celsius
Gas Inlet T= ~180 c
Total Gas ...

posted 1 month ago

Tom W. 22 days ago • Edit • Tom likes this. »
See more »
Dr. Jörg W. Gujarati P.
Carlos G.

Carlos

Fasteners

Hi, I would like to know what coating is recomendad for protecting steel fasteners from corrosion?

posted 1 month ago

Alex J. 1 month ago • Edit • Carlos, would you be able to provide a bit more information about the application: What are the fasteners used for (flanges in pipes, pump ... »
See all 13 comments »
jose H. Luis G. Alex J.
Jake D.

Jake

What do Sulfuric Acid professionals look for in an ideal job? Career Opportunity: J.R. Simplot Company simplot.com/careers Job #1080

The J.R. Simplot Company offers great compensation, promising opportunities for advancement, safe and respectful work environments, and ...

Explore career opportunities at the J.R. Simplot Company. We have openings at several locations around the globe.

posted 2 months ago

Mahdi Y. 1 month ago • Edit • hi sir , you can study my profile ....... »
See all 3 comments »
NAGARAJU K. Mahdi Y. Mahdi Y.

About this Group

  • Created: June 12, 2009
  • Type: Networking Group
  • Members: 761
Ad

Group Statistics

CHECK OUT INSIGHTFUL STATISTICS ON THIS GROUP

  1. Director
  2. Manager
  3. Entry
MEMBERS
3,759
View Group Statistics »
Profile photo Profile photo